XTX775
Series: XTX Series™
Cylinders: Single
Cooling System: Air
Shaft: Vertical
Engine Type: Four-Cycle/Gasoline/Air-Cooled/OHV/Aluminum Block/Cast-Iron Cylinder Liners
Additional Features: Base on Commercial Engine Designs/Never Requires an Oil Change-Just Check Oil Level Before Each Use/Heavy-Duty Cast-Iron Cylinder Liners/Platinum-Tip Spark Plug, High-Mount Dipstick Precleaner/Accu-Fill® Easy-To-Fill Fuel Tank/Consistent-Cut™ for more Consistent Power/Smart-Choke™ Technology with Easy-Pull/No-Prime Starting
- Specification
- Performance Curve
| MODEL | XTX775 | ||
|---|---|---|---|
| Gross Torque @ 2800 rpm | ft lb (Nm) | 7.75 (10.5) | |
| Displacement | cu in (cc) | 10.6 (173) | |
| Bore | in (mm) | 2.7 (70) | |
| Stroke | in (mm) | 1.8 (45) | |
| Compression Ratio | 8.5:1 | ||
| Dry Weight | lb (kg) | 26.9 (12.2) | |
| Oil Capacity | U.S. qt (L) | 0.6 (0.6) | |
| Fuel Capacity | U.S. qt (L) | 1.2 (1.1) | |
| Lubrication | Splash | ||
| Dimensions 1* L x W x H | in (mm) | 17.1 x 13.9 x 11 (434 x 353 x 279) | |
| Emission Compliance | EU Stage V, EPA Phase III, CARB Phase III, China Phase II | ||
*RATED PER SAE J1940 GROSS
*Length is recoil starter to PTO surface. Height is width USA 50 state evap fuel cap.
